51 23 215 Removing and installing/replacing cable for front hood/bonnet locks (in engine compartment) on right and left
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove both hood/bonnet locks . See 51 23 100 Removing and installing/replacing right engine hood/bonnet lock or 51 23 110 Removing and installing/replacing left hood/bonnet lock .
Unclip coupling (1) from lock carrier (2).
Open coupling (1) and disengage cable (3).
If necessary, release cable (4) from retainers at lock carrier (2).
Feed out coupling (1) with cable (4).