41 21 940 Left C-pillar partial replacement (side panel removed)

WARNING: This page is about a different variant/trim than selected.

Refer to relevant service information in BODY, GENERAL .

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Use only approved SPOT-WELDING APPARATUS for repairs.

Place vehicle on straightening bench.

The following new body parts are required:

Support, C-pillar (1)
Reinforcement plate (2)
C-pillar, bottom inner (3)
Extension, side panel (4)

Fig 1: Identifying Reinforcement Plate, Support, C-Pillar And Extension

G05516614

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Fig 2: Identifying Open Weld Joints Area

G05516615

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in areas (1).

Fig 3: Identifying Open Weld Joints Area

G05516616

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Fig 4: Identifying Open Weld Joints Area

G05516611

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Remove C-pillar section.

Fig 5: Identifying Open Weld Joints Area

G05516612

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

First weld reinforcement plate (1) and C-pillar (2).

Fig 6: Identifying Weld Reinforcement Plate And C-Pillar

G05516619

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Weld new components in areas (1) additionally.

Fig 7: Identifying Weld Components Areas

G05516620

Courtesy of BMW OF NORTH AMERICA, INC.

Preparation of new part:

Adjust new parts to fit with straightening attachment or universal mount.