41 00... General notes regarding bonding
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Conform with safety precautions! See SAFETY AT WORK and INFORMATION ON HAZARDS .
- The bonding surfaces must be kept free of all types of dirt and contamination. Avoid leaving fingerprints.
- Cleanliness is top priority when bonding!
- Cleaning agent: Cleaning agent R1
Expiration date of adhesive:
- The adhesive cartridge is marked with a date.
- Do not use the adhesive after this date.
2-component adhesive application:
- Insert adhesive cartridge in adhesive gun, remove cap and allow some adhesive to emerge. Strip adhesive components uniformly and attach mixing tube.
- Allow approx. 1 mixer length of mixed adhesive to emerge (there must be no smearing of colors). Only then apply the mixed adhesive to one side of the bonding surface.