LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 984 (Body Equipment - Repair Instructions) >> Trunk Latch Locks >> 51 24 150 Removing and installing/replacing hydraulic unit for rear lid actuation (electrohydraulic-fully automatic) >> Sealing Connections On Hydraulic Unit And Hose Connections For Hydraulic Cylinders:

Sealing Connections On Hydraulic Unit And Hose Connections For Hydraulic Cylinders:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Hydraulic unit:

Use seal plugs from "Small parts for hydraulic unit"* set and removed seals.

Hose connections:

Use seal plugs with cap nuts from "Small parts for hydraulic unit"* set and removed seals.

* Sourcing reference: BMW Parts Service

Installation: 

Always fit new banjo bolts (1) and seals (2 and 4).

Fig 1: Identifying Banjo Bolts And Seals
G03291462Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

If necessary, replace faulty mounts (1) for hydraulic unit (2).

Fig 2: Identifying Hydraulic Unit Mounts
G03291463Courtesy of BMW OF NORTH AMERICA, INC.