LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 984 (Body Equipment - Repair Instructions) >> Mirrors/Covers/Ashtrays/Shelves/Trays >> 51 16 367 Removing and installing right glovebox (with active knee protector) with housing >> Version from MY 2005:

Version from MY 2005:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Lever out lock (1) towards rear and detach Bowden cable (2) upwards.

Unhook Bowden cable nipple (3).

Version with active knee protector:

WARNING: Unlock and disconnect plug connection (1) for active knee protector.

Unfasten plug connection (2) and disconnect.

Fig 1: Removing Glovebox
G03290302Courtesy of BMW OF NORTH AMERICA, INC.

Remove glovebox (3).

Version without active knee protector:

Unfasten plug connection (1) and disconnect.

Fig 2: Disconnecting Plug Connection
G03290303Courtesy of BMW OF NORTH AMERICA, INC.

Remove glovebox (2).

Installation: 

Adjust glovebox (1) to instrument panel (2):

A = approx. 5 mm

B = approx. 4 mm (center)

Check function.

Fig 3: Adjusting Glovebox To Instrument Panel
G03290304Courtesy of BMW OF NORTH AMERICA, INC.

Version with active knee protector:

IMPORTANT: Cable (1) on glovebox (2) must not be damaged.
Fig 4: Identifying Cable On Glovebox
G03290305Courtesy of BMW OF NORTH AMERICA, INC.