11 13 010 Removing and installing/replacing oil sump top section (N62): Installation:
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
Replace sealing ring on dipstick guide tube.
Free sealing faces of seal debris and clean.
- Replace seal.
- Install oil sump.
- Insert all screws on transmission end,
- Tighten down all screws on oil sump.
Tightening torque 11 13 2AZ. Refer to ENGINE - TIGHTENING TORQUES .