LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (Body Equipment - Repair) >> Trunk Latch, Lock >> 51 24 145 Removing and installing/replacing button for trunk lid actuation

51 24 145 Removing and installing/replacing button for trunk lid actuation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 BMW 540i, 2002 BMW 540i, 2001 BMW 540i, 2000 BMW 540i, and 1999 BMW 540i. However, it is still accessible from the selected car via links, so may be relevant.

Remove lower trim power from trunk lid, refer to 51 49 005 REMOVING AND INSTALLING/REPLACING TRIM FOR LOWER TRUNK LID 

Pull out connector attachment (1) for line in cable bracket (2).

Fig 1: Pulling Out Connector Attachment For Line In Cable Bracket
G03153642Courtesy of BMW OF NORTH AMERICA, INC.

Lift out top button (1) and pull upwards (2) to remove.

Fig 2: Lifting Out Top Button And Pull Upwards
G03153643Courtesy of BMW OF NORTH AMERICA, INC.

Installation 

  1. Insert lines through right bore.
Fig 3: Inserting Lines Through Right Bore
G03153644Courtesy of BMW OF NORTH AMERICA, INC.

Pull off clip (1) and remove micro-switch (2). Pull off seal (3).

Installation 

  1. Perform function check with trunk lid open.
Fig 4: Checking With Trunk Lid Open
G03153645Courtesy of BMW OF NORTH AMERICA, INC.