51 14 110 Removing and installing / replacing rear model emblem

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 BMW 540i, 2002 BMW 540i, 2001 BMW 540i, 2000 BMW 540i, and 1999 BMW 540i. However, it is still accessible from the selected car via links, so may be relevant.

The model sign is cemented and cannot be reused after removal.

The model sign must be installed at room temperature.

Coat nylon string or thread with tenside (e.g. dish detergent), cut through adhesive layer and remove with washing benzine.

At paint baking temperatures exceeding 80° C, the model designation must be removed.

sedan:

Fig 1: Applying Adhesive Tape Up To Upper Edge (Sedan)

Courtesy of BMW OF NORTH AMERICA, INC.

touring:

Fig 2: Applying Adhesive Tape Up To Upper Edge (Touring)

Courtesy of BMW OF NORTH AMERICA, INC.