36 11 533 Removing and installing/replacing RDC wheel electronics: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 BMW 540i, 2002 BMW 540i, 2001 BMW 540i, 2000 BMW 540i, and 1999 BMW 540i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a tire sealing fluid has been used, replace the wheel electronics.

When a tire has been removed, do not clean the rim with installed wheel electronics with high-pressure cleaning equipment.

Do not treat wheel electronics with solvents, cleaning agents etc. If dirty, wipe with a clean cloth only.

Do not clean wheel electronics with compressed air.

CAUTION: If the wheel electronics have been removed, the complete valve must be replaced.

Remove tires,

refer to 36 12 001 CHANGING A TIRE (ON FRONT, REAR OR SPARE WHEEL) .