11 11 Engine Block, Cylinder Crankcase M54 B22
WARNING: This page is about a different car, the 2003 BMW 530i, 2002 BMW 530i, and 2001 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS - ENGINE BLOCK, CYLINDER CRANKCASE M54 B22
| Bore hole (Diameter) (1) | mm | 80.000 +0.010 | ||
| 1. Interference (1) (only permitted for aluminum engine block with cast iron liners) | mm | 80.250 +0.010 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.010 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||