11 12 Cylinder Head with Cover M54
WARNING: This page is about a different car, the 2003 BMW 530i, 2002 BMW 530i, and 2001 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS - CYLINDER HEAD WITH COVER M54
| Cylinder head height: Original dimension | mm | 140.0 | ||
| Machining limit (1) | mm | 139.7 | ||
| Valve guides are not available as replacement parts. | ||||
| Inside diameter of valve guide (installed) | ||||
| Standard | mm | 6.0 H7 | ||
| Size 1 | mm | 6.1 H7 | ||
| Size 2 | mm | 6.2 H7 | ||
| Max. permissible tilt clearance (between valve and valve guide) | mm | 0.5 | ||
| Bearing of camshaft | ||||
| Pilot bearing (1) width | mm | 20 d8 | ||
|
||||