51 14 110 Removing and installing/replacing rear model emblem: Sedan

WARNING: This page is about a different car, the 2003 BMW 530i, 2002 BMW 530i, and 2001 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Model Emblem Placement Dimensions (Sedan)

Courtesy of BMW OF NORTH AMERICA, INC.

Apply adhesive tape up to upper edge "A" and mark dimensions as per table.

Dimension in mm

Sedan 520 i - 540 i:

A = 23, B = 30, C = 16

Sedan 525 td, tds:

A = 23, B = 30, D = 20