51 14 110 Removing and installing/replacing rear model emblem: Notes
WARNING: This page is about a different car, the 2003 BMW 530i, 2002 BMW 530i, and 2001 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
The model sign is cemented and cannot be reused after removal.
The model sign must be installed at room temperature.
Coat nylon string or thread with tenside (e.g. dish detergent), cut through adhesive layer and remove with washing benzine.
At paint baking temperatures exceeding 80° C, the model designation must be removed.