Bleeding Power Steering System
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 BMW 530i, 2003 BMW 525i, 2002 BMW 530i, 2002 BMW 525i, and 2001 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before removing the oil tank cap, clean the tank and its immediate vicinity thoroughly. No dirt is allowed to enter the system.
- Turn off engine and fill oil tank until level reaches "MAX" mark on dipstick.
- Start engine. Turn steering wheel twice each as far as left and right lock.
- Turn off engine and top off hydraulic fluid again to "MAX".
Refer to FLUID TYPE .