64 11 875 Removing And Installing/Replacing SERVODRIVE For Defrosting Flap (Automatic A/C)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim panel for pedal assembly. Refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Unclip wiring harness (1) and slide to one side.

Fig 1: Removing Servodrive For Defrosting Flap

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (2) and disconnect.

Press lock (3) and pull out servodrive for defrosting flap (4) in direction of arrow.

Installation:

Follow repair instruction "Installing servodrive". Refer to 64 11... INSTALLING SERVODRIVE .