51 21 003 Replacing door detent (lock striker), front left or right
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Release screws (1) and remove door detent (3). Installation: Basic adjustment via crosswire on B-pillar (4) and notches (2) on door detent (3). Tightening torque, see 51 21 3AZ in BODY EQUIPMENT - TIGHTENING TORQUES . Adjust door detent.