11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2005 BMW Z4, 2004 BMW Z4, and 2003 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
11 21 CRANKSHAFT AND BEARINGS TIGHTENING SPECIFICATION
| Application | Type | thread | tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | |||
| Torque angle | 45 ° | |||
| Increment wheel on crankshaft | All others | M5 10.9 | Replace screws | 13 Nm |
| Increment wheel on crankshaft | All others | M5 8.8 | Replace screws | 5.5 Nm |