11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2005 BMW Z4, 2004 BMW Z4, and 2003 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
11 24 CONNECTING RODS AND BEARINGS TIGHTENING SPECIFICATION
| Application | Type | Tightening specification | Measure |
|---|---|---|---|
| 1AZ Connecting rod bolts | M10 / M30 | Replace, wash and oil screws | 55 Nm |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 /S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S | Replace, wash and oil screws | ||
| Application torque | 5 Nm | ||
| Jointing torque | 20 Nm | ||
| Torque angle | 70 ° | ||
| M60 / M62 | Replace, wash and oil screws | ||
| Application torque | 5 Nm | ||
| Jointing torque | 20 Nm | ||
| Torque angle | 80 ° | ||
| M67 | Replace screws, do not wash off screw coating | ||
| Application torque | 5 Nm | ||
| Jointing torque | 20 Nm | ||
| Torque angle | 85 ° |