22 11 Engine Suspension
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
22 11 ENGINE SUSPENSION TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine mount to front axle support | E52 / E85 | 42 N.m | ||
| E60 / E61 / E63 / E64 / E65 / E66 / E67 | M8-8 | 19 N.m | ||
| E53 | M8-10.9 | 30 N.m | ||
| E83 | M8 | 21 N.m | ||
| E87 / E90 | M8 10.9 | 28 N.m | ||
| 2AZ Engine mount to engine support arm | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E53 / E83 / E87 / E90 | M10 10.9 | 56 N.m | |
| E65 / E66 / E67 | M12 10.9 | 100 N.m | ||
| E85 / E52 | 42 N.m | |||
| 3AZ Engine support arm to engine | E60 / E61 / E63 / E64 / E65 / E66 / E67 / E87 / E90 | M10 8.8 | 38 N.m | |
| E60/61 N52 / E63/64 N52 / E83/85 N52 / E87/ 90 N52 / E65 N52 | M12 | Aluminium screws marked blue must be replaced | ||
| Jointing torque | 34 N.m | |||
| Torque angle | 90-110° | |||
| E60 / E61 / E65 / E66 / E67 | M8 8.8 | 19 N.m | ||
| E85 / E83 | M8 8.8 | 21 N.m | ||
| E53 (N62/ M54) | 38 N.m | |||
| E53 (M57) | 65 N.m | |||
| 4AZ Engine mount to mounting bracket | E65 / E60 / E61 / E63/E64 | M8 8.8 | 19 N.m | |
| 5AZ Mounting bracket to front axle carrier | E65 / E60 / E61 / E63 / E64 | M8-8 | 19 N.m |