11 62 Exhaust manifold
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST MANIFOLD TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to cylinder head Coat screw connections with CRC copper paste | All | M6 | Replace nuts | 10 N.m |
| M50 / M52 / M52TU / M54 / M56 / S52 / S50 US | M7 | Replace nuts | 20 N.m | |
| All / others | M7 | Replace nuts | 15 N.m | |
| M10 | M8 | Upper row of staybolts installed with bolt cement | ||
| 23 N.m | ||||
| M21 | M8 | 12 N.m | ||
| Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn | ||||
| 12 N.m | ||||
| M41 / M47 / M47TU / M51 / M57 / M57TU | M8 | Replace nuts | 20 N.m | |
| All / others | M8 | Replace nuts | 23 N.m | |