11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10 / M30 | Replace, wash and oil screws | 55 N.m | |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 / M52TU / M54 / M56 / M57 / M57TU / S52 / S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S | Replace, wash and oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 70 ° | |||
| M60 / M62 | Replace, wash and oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 80° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 85 ° |