11 25 Pistons with Rings and Pins N62 B36
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS WITH RINGS AND PINS N62 B36 SPECIFICATIONS
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 11 |
| Piston diameter at measuring point "A" | ||
| Original, stage 0 (new dimension) | mm | 83.985 +/- 0.014 |
| Oversize, stage 1 (new dimension) | mm | 84.235 +/- 0.014 |
| Oversize, stage 2 (new dimension) | mm | 84.485 +/- 0.014 |
| Piston installation clearance (piston new) | mm | 0.001 ... 0.044 |
| Piston installation clearance (piston worn) | mm | 0.026 ... 0.073 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |
PISTONS WITH RINGS AND PINS N62 B36 SPECIFICATIONS
| Piston and pin are paired to each other - replace together only. | ||
| Measuring point "A" (position) | mm | 11 |
| Piston diameter at measuring point "A" | ||
| Original, stage 0 (new dimension) | mm | 83.985 +/- 0.014 |
| Oversize, stage 1 (new dimension) | mm | 84.235 +/- 0.014 |
| Oversize, stage 2 (new dimension) | mm | 84.485 +/- 0.014 |
| Piston installation clearance (piston new) | mm | 0.001 ... 0.044 |
| Piston installation clearance (piston worn) | mm | 0.026 ... 0.073 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.10 |