LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 833 (Engine - Technical Data (N62)) >> Crankshaft And Bearings >> 11 21 Crankshaft and Bearings N62

11 21 Crankshaft and Bearings N62

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS

Ground sizes of main bearing journals   Bearing point 1
Standard yellow mm 69.974 +0.006
Standard green mm 69.967 +0.006
Original violet mm 69.961 +0.005
Undersize 1 (U 0.25) yellow mm 69.724 +0.006
Undersize 1 (U 0.25) green mm 69.717 +0.006
Stage 1 (U 0.25) violet mm 69.711 +0.005
Undersize 2 (U 0.50) yellow mm 69.474 +0.006
Undersize 2 (U 0.50) green mm 69.467 +0.006
Stage 2 (U 0.50) violet mm 69.461 +0.005
Crankshaft bearing clearance, radial mm 0.024 ... 0.052
Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). mm 0.15


CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS

Ground sizes of main bearing journals   Bearing points 2 to 5
Standard yellow mm 69.984 +0.006
Standard green mm 69.977 +0.006
Original violet mm 69.971 +0.005
Undersize 1 (U 0.25) yellow mm 69.734 +0.006
Undersize 1 (U 0.25) green mm 69.727 +0.006
Stage 1 (U 0.25) violet mm 69.721 +0.005
Undersize 2 (U 0.50) yellow mm 69.484 +0.006
Undersize 2 (U 0.50) green mm 69.477 +0.006
Stage 2 (U 0.50) violet mm 69.471 +0.005
Crankshaft bearing clearance, radial mm 0.024 ... 0.052
Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). mm 0.15


CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS

Grinding stages, crankshaft guide bearing    
Standard mm 28.0 F8
Size 1 mm 28.2 F8
Size 2 mm 28.4 F8
Crankshaft axial play mm 0.080 ... 0.246


CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS

Ground sizes of conrod bearing journals    
Standard mm 54.00 -0.009-0.025
Size 1 mm 53.75 -0.009-0.025
Size 2 mm 53.50 -0.009-0.025
Radial conrod bearing play mm 0.028 ... 0.070