61 0 300 Releasing tool (complete kit)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Measuring and testing equipment

Note: Replaces special tool 61 1 150 from 09/2005.

SI number: 2 05 05 (217).

Order number: 61 0 300.

Releasing tool (complete kit).

Consisting of:

1 = 61 0 301 Releasing tool for round contacts.

Note: Replaces special tool 61 1 131 from 09/2005.

2 = 61 0 302 Replacement sleeve D = 1.5.

Note: Replaces special tool 61 1 157 from 09/2005.

In conjunction with: 61 3 301.

3 = 61 0 303 Releasing tool for round systems with D = 2.5.

Note: Replaces special tool 61 1 132 from 09/2005.

4 = 61 0 304 Replacement sleeve (D = 2.5).

Note: Replaces special tool 61 1 156 from 09/2005.

5 = 61 0 305 Releasing tool for round contacts

Note: Replaces special tool 61 1 133 from 09/2005.

6 = 61 0 306 Replacement sleeve (D = 3.5) for 61 0 305.

Note: Replaces special tool 61 1 155 from 09/2005.

7 = 61 0 307 Releasing tool for jack-side round contacts (D = 2.5).

8 = 61 0 308 Replacement sleeve for special tool 61 0 307 (D = 2.5).

9 = 61 0 309 Releasing tool for pin-side round contact (D = 1.5) - Kostal.

Note: Replaces special tool 61 1 139 from 09/2005.

10 = 61 0 311 Replacement sleeve for special tool 61 0 309.

Note: Replaces special tool 61 1 154 from 09/2005.

11 = 61 0 312 Releasing tool for flat spring contacts with a snap-in lug (1.6 mm).

Note: Replaces special tool 61 1 134 from 09/2005.

12 = 61 0 313 Releasing tool for flat spring contacts with a snap-in pin (1.9 mm).

Note: Replaces special tool 61 1 137 from 09/2005.

13 = 61 0 314 Releasing tool for flat spring contact with a snap-in pin (2.7 mm).

Note: Replaces special tool 61 1 135 from 09/2005.

14 = 61 0 315 Releasing tool for flat spring contacts with double snap-in pin "Micro-Timer 2".

Note: Replaces special tool 61 1 151 from 09/2005.

15 = 61 0 316 Releasing tool for flat spring contacts with double snap-in pin "SPT 4.8" "JPT 2.8".

Note: Replaces special tool 61 1 136 from 09/2005.

16 = 61 0 317 Releasing tool for LSK 8.

Note: Replaces special tool 61 1 200 from 09/2005.

17 = 61 0 318 Releasing tool for "Maxi Power Timer 9.5".

Note: Replaces special tool 61 1 180 from 09/2005.

18 = 61 0 319 Releasing tool for sensor laminated contacts ("SLK2.8").

Note: Replaces special tool 61 1 148 from 09/2005.

19 = 61 0 321 Releasing tool for sensor laminated contacts with releasing element ("SLK 2.8").

20 = 61 0 322 Releasing tool for mini laminated contact ("MLK 1.2 mm").

21 = 61 0 323 Releasing tool for flat spring contacts with a snap-in pin (MQS).

Note: Replaces special tool 61 1 152 from 09/2005.

22 = 61 0 324 Releasing tool for secondary locking.

Note: Universal tool for damage-free opening/removal of secondary locking.

23 = 61 0 329 Case with foam inlay without tools.

Note: Storage system for releasing tools from kit 61 0 300.

Fig 1: Identifying Special Tool 61 0 300 Releasing Tool (Complete Kit)

Courtesy of BMW OF NORTH AMERICA, INC.