11 8 240 Assembly tool
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
Note: For drawing in shaft seal on crankshaft at front.
Engine: W10, W11.
SI number: 1 05 01 (718).
Order number: 11 8 240 .
Assembly tool.
Consisting of:
- = 11 8 241 Nut.
Note: With bearing.
- = 11 8 242 Spindle.