11 2 380 Puller

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For removing rotary shaft seal from timing case cover.

Engine: M41, M47, M50, M51, M52, M52TU, M54, M56, M60, M62, S50B30, S50B32, S54, S62, W10, W11.

Storage location: A38, C25.

SI number: 1 05 92 (507).

Order number: 11 2 380

Puller.

Consisting of:

Fig 1: Identifying Special Tool 11 2 380 Puller

Courtesy of BMW OF NORTH AMERICA, INC.