LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 761 (Audio, Navigation And Anti-Theft - Repair - Cooper (R50), Cooper S (R53) & Convertible (R52)) >> Rear Window Aerial/Antenna >> 65 24 020 Removing and installing/replacing blocking circuit (BMW Business/MINI Boost radio from 07/2004)

65 24 020 Removing and installing/replacing blocking circuit (BMW Business/MINI Boost radio from 07/2004)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

Unclip wiring harness (1) as illustrated.

Release screw (2).

Disconnect plug connections (4) and remove blocking circuit (3).

Installation: 

If necessary, replace faulty clips.

Check installation position of wiring harness (1), correct if necessary.

Fig 1: Identifying Blocking Circuit Wiring Harness
G00426890Courtesy of BMW OF NORTH AMERICA, INC.