61 61 270 Removing and installing complete wiper console
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Remove cowl panel cover.
Release nut (1).
Installation:
Make sure holder is correctly positioned in relation to grommet.
Remove screws (2).
Installation: (All Fastenings):
Tightening torque, refer to 61 61 2AZ in GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE - COOPER (1.6L) R50/W10 .
Disconnect plug connector from engine and remove wipe mechanism/engine.