61 31 020 Removing and installing/replacing ignition starter switch

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Disconnect battery negative lead. Refer to 12 00 DISCONNECTING AND CONNECTING BATTERY .

Release screws (1).

Withdraw ignition starter switch.

Disconnect plug connection (2) and remove ignition starter switch.

Fig 1: Locating Ignition Starter Switch Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check alignment of ignition starter switch to steering wheel lock.

Check alignment of turn indicator lever to steering wheel.

Secure screws with paint.