61 13 051 Removing and installing/replacing fuse box in engine compartment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Remove battery container. Refer to 61 21 100 REMOVING AND INSTALLING/REPLACING BATTERY CONTAINER .

Release retaining clips (1) and remove fuse box cover (2).

Fig 1: Removing Fuse Box Cover

G03307004

Courtesy of BMW OF NORTH AMERICA, INC.

Detach plug connector (1).

Remove screws (2).

Tightening torque, refer to 61 13 1AZ in GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE - COOPER (1.6L) R50/W10 .

Remove screw (3).

Tightening torque, refer to 61 13 4AZ in GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE - COOPER (1.6L) R50/W10 .

Fig 2: Detaching Plug Connector

G03307005

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connectors on underside of fuse box (1).

Installation:

Write down color and position of plug connectors before removing.

Replacement only:

Remove cover (2).

Remove fuses and relays.

Fig 3: Removing Fuses And Relays

G03307006

Courtesy of BMW OF NORTH AMERICA, INC.