LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 757 (General Electrical System - Repair - Cooper (R50), Cooper S (R53) & Convertible (R52)) >> Plug Connections, Terminals, Power Distribution Box >> 61 13 ... Retaining bracket

61 13 ... Retaining bracket

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Pull relevant fuse out of fuse block (1).

NOTE: Mark positions when removing fuses.

Pull locking slide (2) out of fuse block (1) as far as it will go.

Fig 1: Removing Locking Slide From Fuse Block
G03306993Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 1 136 or 61 1 137 (ejector), press back arrester hook (3) of appropriate contact and pull out cable.

Fig 2: Pressing Arrester Hook
G03306994Courtesy of BMW OF NORTH AMERICA, INC.