61 33 000 Replacing horn (anti-theft alarm system)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Release nuts (1), tightening torque, refer to 61 35 2AZ in GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE - COOPER (1.6L) R50/W10 .

Fig 1: Identifying Horn Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 2: Locating Plug Connection On Horn

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1), tightening torque, refer to 61 35 3AZ in GENERAL ELECTRICAL SYSTEM - TIGHTENING TORQUE - COOPER (1.6L) R50/W10 .

Remove horn (2) from holder.

Fig 3: View Of Horn In Holder

Courtesy of BMW OF NORTH AMERICA, INC.