34 52 550 Removing and installing/replacing DSC yaw sensor (DSC sensor)
WARNING: This page is about a different car, the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, and 2005 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary Preliminary Tasks:
- Remove rear center console. Refer to 51 16 216 REMOVING AND INSTALLING REAR CENTER CONSOLE .
NOTE:
The DSC sensor contains the functions of the transversal acceleration sensor and the rotation rate sensor.
Unlock and disconnect plug (1). Release screws (2) and remove DSC sensor.
Installation:
Tightening torque, (8 N.m.).
IMPORTANT:
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.