LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 748 (Cooling System - Repair - Cooper (W10 Engine)) >> Coolant, Checking Cooling Systems >> 17 00 ... Follow instructions for working on cooling system

17 00 ... Follow instructions for working on cooling system

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Scalding hazard! Work on the cooling system may only be carried out on the engine after it has cooled down.
IMPORTANT: When working on oil, coolant or fuel lines, make sure no oil, coolant or fuel drips onto the alternator. Cover alternator with suitable material. Otherwise there may be alternator malfunctions.
IMPORTANT: Only open the cooling system when the coolant is no longer hot. Air may enter the cooling system if it is opened while the coolant is still hot. This may cause the engine to overheat and result in permanent damage.

Recycling: 

Catch and dispose of drained coolant.

Comply with the waste disposal regulations applicable in the relevant countries.