Removal & Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 BMW Z3, 2002 BMW M3, 2002 BMW M Roadster, 2002 BMW M Coupe, and 2002 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove appropriate front or rear door, or rear seat side trim panel. Disconnect side air bag module electrical connector. Remove and discard side air bag mounting screws. Remove side air bag module from vehicle.
- To install, reverse removal procedure. Use NEW micro-encapsulated side air bag module mounting screws and tighten to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .