LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems) >> Removal & Installation >> Seat Belt PRETENSIONERS >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 BMW Z3, 2002 BMW M3, 2002 BMW M Roadster, 2002 BMW M Coupe, and 2002 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Remove front seat and B-pillar trim. Open cable strap for plug on seat belt pretensioner. Disconnect electrical connector from seat belt pretensioner. Remove seat belt pretensioner mounting bolt. Note position of seat belt pretensioner on seat. Remove seat belt pretensioners.
  3. To install, reverse removal procedure. Replace micro encapsulated seat belt pretensioner mounting bolt and cable strap. Tighten seat belt pretensioners mounting bolt to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
scientia non olet · About LEMON Manuals