LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 BMW Z3, 2002 BMW M3, 2002 BMW M Roadster, 2002 BMW M Coupe, and 2002 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Remove passenger-side instrument panel air vent. Insert Plastic Wedge (00 9 323) on both sides of passenger-side air bag cover and release catches. Remove screw and lift off air bag cover. DO NOT allow tension to occur on air bag cover strap(s) when removing passenger-side air bag or cover. Remove retaining nuts and lift passenger-side air bag module from instrument panel and disconnect electrical connector. Remove air bag module from vehicle.
  3. To install, reverse removal procedure. Tighten air bag module retaining nuts to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
scientia non olet · About LEMON Manuals