12 41 Starter and Mounting Parts
WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, 2001 BMW 525i, and 2000 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.
STARTER AND MOUNTING PARTS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to transmission bell housing | All | 45 Nm | ||
| 2AZ Support to starter | All | M5 | 5 Nm | |
| 3AZ Support to crankcase | All | 47 Nm | ||
| 4AZ Electrical leads to starter | ||||
| All | M5 | 5 Nm | ||
| All | M6 | 7 Nm | ||
| All | M8 | 13 Nm | ||
| 5AZ Bolt connection, pole tube | All | M6 | 6 Nm | |
| 6AZ Heat shield to starter motor | M6 | 6 Nm |