11 24 Connecting Rods and Bearings
WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS AND BEARINGS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10 / M30 | Replace, wash and oil screws | 55 Nm | |
| M20 / M21 / M40 / M41 / M42 / M43 / M43TU / M44 / M47 / M47TU / M50 / M51 / M52 / M52TU / M54 / M56 / M57 / M57TU / S52 / S50 US / M70 / S70 / M73 / N40 / N42 / N45 / N46 / N62 / N73 / N62S | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° | |||
| M60 / M62 | Replace, wash and oil screws | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 80 ° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 Nm | |||
| Jointing torque | 20 Nm | |||
| Torque angle | 85 ° |