65 52 043 Removing and installing/replacing housing with drive for on-board monitor (widescreen)
WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
Remove complete on-board monitor (widescreen).
Remove panel for on-board monitor (control panel, widescreen).
NOTE:
After removing panel for on-board monitor, reconnect housing with drive for on-board monitor to power supply until retaining brackets for monitor panel are fully retracted.