51 49 005 Removing and installing/replacing trim for lower trunk lid

WARNING: This page is about a different car, the 2003 BMW 525i, 2002 BMW 525i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.

Open trunk lid.

Lift out expanding rivets (1).

Lift out finisher (2) and unfasten screw.

Pull trim downwards to unclip.

Fig 1: Lifting Out Finisher & Unfastening Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace damaged clips.

Fig 2: Replacing Damaged Clips

Courtesy of BMW OF NORTH AMERICA, INC.