LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Ignition System >> Powertrain Control Module (Pcm) >> Removal & Installation (5-Series & 7-Series)

Removal & Installation (5-Series & 7-Series)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.

PCM is located in box in right rear corner of engine compartment. Open locking bracket on PCM box. Open filter housing cover. Unhook filter housing from hinges. Unhook retaining clip and pull filter housing upward. Remove filter housing. Remove 4 PCM cover bolts. Disconnect PCM electrical connector. Remove PCM. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals