LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Ignition System >> Powertrain Control Module (Pcm) >> Removal & Installation (3-Series - E46)

Removal & Installation (3-Series - E46)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.

PCM is located in box in left rear corner of engine compartment. See Fig 1. Remove 4 cover screws. Disconnect PCM connector. Remove PCM. See Fig 2. To install, reverse removal procedure. Ensure wiring harness and cover are correctly installed to prevent water entry.

Fig 1: Removing PCM Cover Screws (E46)
G99C05490Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing PCM (E46)
G99E05491Courtesy of BMW OF NORTH AMERICA, INC.