LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Ignition System >> Knock Sensor >> Removal (4-Cylinder)

Removal (4-Cylinder)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover. See Figure. Remove harness conduit from injector rail. Remove upper intake manifold. Remove harness cover from lower intake manifold.
  2. Mark knock sensor connectors for reassembly reference. Disconnect coolant hose to access knock sensors. Remove knock sensor(s) from engine.
scientia non olet · About LEMON Manuals