LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Ignition System >> Knock Sensor >> Installation

Knock Sensor: Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.

Clean knock sensor contact area. When tightening sensors, ensure sensor and wiring do not interfere or chafe on brackets or other components. Ensure sensors are plugged into correct connectors. To complete installation, reverse removal procedure.



Clean knock sensor contact surface. When tightening knock sensors, ensure sensor and wiring do not interfere or chafe on brackets or other components. Ensure sensors are plugged into correct connectors. To complete installation, reverse removal procedure.



Clean knock sensor contact surface. When tightening knock sensors, ensure sensor and wiring do not interfere or chafe on brackets or other components. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals