Removal & Installation (6-Cylinder - E36)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.
Remove engine cover. See Figure. Locate sensor connector near engine oil level dipstick. Remove screws and crankshaft pulley cover. Locate sensor on right side of crankshaft and remove bolt and sensor. To install, reverse removal procedure.