LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Ignition System >> Crankshaft Position Sensor >> Removal & Installation (4-Cylinder)

Removal & Installation (4-Cylinder)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.

Remove engine cover. See Figure. Remove screw securing sensor lead above radiator hoses. Remove sensor lead from clip holder and guide rail. Locate sensor on right side of crankshaft and remove bolt and sensor. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals