LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Fuel System >> Mass Airflow Sensor >> Removal & Installation (6-Cylinder - E36)

Removal & Installation (6-Cylinder - E36)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn coupling and disconnect mass airflow sensor connector. Loosen hose clamp and pull off bellows.
  2. Loosen screws or open fasteners at air cleaner assembly. Remove mass airflow sensor and bellows. See Figure. To install, reverse removal procedure. Ensure mass airflow sensor grille is not damaged during installation.
scientia non olet · About LEMON Manuals