LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Removal, Overhaul & Installation - 1 Of 2) >> Fuel System >> Idle Speed Control Valve >> Removal & Installation (6-Cylinder - E36)

Removal & Installation (6-Cylinder - E36)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.

Remove air filter housing. Remove throttle valve extension. Disconnect dip stick guide tube. Disconnect idle speed control valve electrical connector. Remove 2 bolts. Remove idle speed control valve. See Figure. Remove gasket and rubber clip. To install, reverse removal procedure.