Removal & Installation (6-Cylinder-Fuel Rail Mount - E36)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1999 BMW Z3, 1999 BMW M3, 1999 BMW M Roadster, 1999 BMW M Coupe, and 1999 BMW 740iL. However, it is still accessible from the selected car via links, so may be relevant.
Remove engine cover. See Figure. Remove fuel rail and injectors. See FUEL RAIL & INJECTORS. Remove circlip securing fuel pressure regulator. Disconnect vacuum hose. Pull out fuel pressure regulator. To install, reverse removal procedure. Use new "O" rings. Ensure lug on circlip engages in recess in injector fuel rail.